24 VDC lighting 2 channels total: 100 W (1 channel 50 W or less)
通道数
2 channels
发光方式
Continuous lighting, strobe lighting (overdrive when emission time is 1000 μs or less)
频闪发光时间
[PWM frequency 100 kHz: Lighting time] 10 μs ~ 9990 μs (10 μs steps), 1 ms to 999 ms (1 ms steps)
[PWM frequency 130 kHz: lighting time] 7.7 μs ~ 7684.6 μs (7.7 μs steps), 1 ms ~ 999 ms (1 ms steps)
[Lighting cycle limit] Duty 7% (requires cycle of 14.3x or more pulse width)
驱动方式
Constant lighting
调光方式
PWM control (frequency: 100 kHz, 130 kHz), variable-voltage control
输入电流
24 VDC ± 10 %
输出电压
PWM mode: 24 VDC Strobe mode*1: 48 VDC Variable-voltage mode*2: LOW: 12 to 24 V, HIGH: 18 to 24 V *1 Automatically switches to 24 VDC drive when strobe emission time is 1 ms or more (the lighting time is set in units of ms). Applies 48 VDC drive when strobe emission time is 1,000 μs or less (the lighting time is set in units of μs). *2 Overdrive is unavailable in variable-voltage mode.
输出电流
Storobe mode: 5.0 A/channel (Duty 7%)
外部控制方式
USB communication (Full-speed, Type-C connector) Parallel communication RS-232C communication
通信接口
USB communication: Serial communication via virtual COM port RS-232C communication: 4800 / 9600 / 19200 / 38400 / 57600 / 115200 bps
输出端口
SMP-03V-BC
适合规格
[Compatible standards] CE, UKCA (Non-compliant with KC) [Environmental regulations] RoHS, REACH [Degree of protection] IP20 (IEC 60529)
使用温湿度
Temperature: 0 to 40°C, Humidity: 20 to 85%RH (no condensation)
保存温湿度
Temperature: -20 to 60°C, Humidity: 20 to 85%RH (no condensation)
冷却方式
Natural air-cooling
重量
260 g
材质
Polycarbonate
附属品
Hardware manual x1, trigger connector x1, power connector x1
注意事项
See the URL below for the combinations of LED lighting available when using strobe overdrive.
备注
Vibration resistance: 10-55 Hz double amplitude 1.5 mm X, Y, Z directions 2 hours each Impact resistance: Approx. 10 G, X, Y, Z directions 3 times each
