15 A (at 100 VAC)/30 A (at 240 VAC) *From a cold start
外部控制输入
Parallel 4 bits/channel, 5V-CMOS level input, pull-up resistance of 4.7Ω Low level: 1.13V max, High level: 3.15V min.
发光脉冲宽度
10μs to 990μs: Set with the light pulse width setting switch and the intensity control knob on the front panel. Lighting time = Pulse Width x Control Light pulse width: 0 to 99 x 10μs (external mode only) Control: 10 to 100% (in 10% steps)
发光延迟
15μs max.
输出端口
SMP-03V-BC (1: Output(+), 2: NC, 3: Output(-)) x 2 pieces
外部控制端口
External control: 25-pin D-sub plug with M2.6 mm screws x 1 piece
触发
Trigger mode: Int/Ext (Both channels are changed simultaneously.) Int (Internal trigger): 1.42 ms cycle, Lighting time of 10 to 100μs (Used for operation confirmation) Ext (External trigger): Photo-coupler input, Current of 5 mA max., Pulse width of 20μs min., Wave rise/fall of 10μs max. (Ambiguous wave pattern is not allowed.), Operable trigger input cycle of 14.2 ms min. (When the pulse width setting switch is set to 99.)
触发输出
Trigger input ON: High pulse output with 5V CMOS signal 8: Trig1 OUT, 9: Trig2 OUT, 10: GND
适合规格
CE, UKCA, RoHS
使用温湿度
Temperature: 0 to 40°C, Humidity: 20 to 85%RH (no condensation)
保存温湿度
Temperature: -20 to 60°C, Humidity: 20 to 85%RH (no condensation)
冷却方式
Natural air-cooling
重量
1200 g
材质
Steel plate t1.0
附属品
2m long 3-prong AC power cord with ground terminal x 1, External connector x 1 Instruction Guide x 1
